Recorders – VBrick Systems Portal Server ETV v4.2.1 User Manual

Page 58

Advertising
background image

46

© 2008 VBrick Systems, Inc.

3. In

Select STB

, select one or more existing STB for which a SAP has been received. This

populates the

STB Configuration

panel. (If you select multiple STBs, it does not populate

the panel; if you need to configure the STBs, you must add them one at a time.)

4. Complete or modify the fields in

STB Configuration

as necessary and click

Submit

. This

adds the new configuration to the list of configured STBs shown on the previous page.

Recorders

A Recorder server enables recording by Portal Server users. If a recorder server is not created
here, any attempt to record a live stream or a stored video will fail. Once enabled, users must
also be assigned the appropriate permissions (see Allow Content Recording on page 98).
(Note: Do not confuse a Recorder server with a Network Video Recorder which is a a
separate product. See the ETV Network Video Recorder Release Notes for more information.)

T

To add a Recorder configuration:

1. Go to

Global Settings > Recorders

.

Note The only time you will manually complete the STB Configuration fields is when you

are defining the configuration for an STB that will be added to the network at a later
time. In this case, you will need to know the configuration data in advance.

Host Name

Required. Host name of STB.

IP Address

Required. IP address of STB.

User Name

Defaults to system-defined value if blank.

User Password

Defaults to system-defined value if blank.

Confirm Password Defaults to system-defined value if blank. Must match User Password

if entered above.

Software Revision

Optional.

STB Model

Select from the dropdown.

Start Mode

Select from the dropdown: ETV Portal Server, Local, or Local-
Fullscreen

Note By installation default, all recordings are stored on the D: drive. If you install ETV

Portal Server on a system without a D: drive, you must subsequently go to

Global

Settings > Recorders

and change the record path as necessary. Also, the

Max Recording

field shows the default number of concurrent recording sessions allowed. If you need
more than 2 concurrent recording sessions, you must purchase a Network Video Recorder.

Advertising