Vizio F20I - Manual (Page 11)

™
VIZIO VMM26 F20I User Guide
11
www.VIZIO.com
Connecting to a Computer
Your monitor has several types of ports for connecting a computer. For more information, see
“Back” on page 8 or “Side” on page 7.
HDMI Connection
Warning:
Make sure that your monitor and the device you are connecting are turned off and the power cords are unplugged.
To connect a computer using HDMI:
1 Connect one end of an HDMI cable to the HDMI1 port on the back of your monitor.
2 Connect the other end of the cable to the HDMI OUT port on the computer.
DVI Connection
Warning:
Make sure that your monitor and the device you are connecting are turned off and the power cords are unplugged.
To connect a computer using DVI:
1 Connect one end of a DVI cable to the DVI port on the back of your monitor.
2 Connect the other end of the cable to the DVI OUT port on the computer.
VGA Connection
Warning:
Make sure that your monitor and the device you are connecting are turned off and the power cords are unplugged.
To connect a computer using VGA:
1 Connect one end of a VGA cable to the VGA port on the back of your monitor.
2 Connect the other end of the cable to the VGA port on the computer.
Connecting USB Devices
You can connect USB devices, such as a camcorder, to the USB ports on the side or back of your
monitor.
Note:
You must connect the USB upstream cable to the USB IN (upstream) port on your monitor and to a USB port on a computer. If you do not
make this connection, the USB ports on your monitor will not work.
To connect a USB device:
1 Connect the USB upstream cable to the USB IN (upstream) port on your monitor.
2 Connect the other end of the cable to a USB port on the computer.
3 Connect a USB cable to a USB port on the side or back of your monitor.
4 Connect the other end of the cable to the USB device.
Adjusting the Height, Tilt, and Swivel
You can adjust the height and tilt of your monitor’s screen.
To adjust the height:
•
Grasp each side of the screen, then slide the screen up or down.