Vizio F20I - Manual (Page 2)

™
2
www.VIZIO.com
VIZIO VMM26 F20I User Guide
Important safety instructions
Your monitor is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent your monitor from being damaged, read
and follow these safety instructions for installing, using, and maintaining your monitor. Keep
these instruction for future reference.
•
To reduce the risk of electric shock or component damage, turn off the power before
connecting other components to your monitor.
•
Unplug the power cord before cleaning your monitor. A damp cloth is sufficient for
cleaning your monitor. Do not use a liquid or a spray cleaner for cleaning your monitor. Do
not use abrasive cleaners.
•
Always use the accessories recommended by the manufacturer to ensure compatibility.
•
When moving your monitor from an area of low temperature to an area of high
temperature, condensation may form inside the housing. Wait until the condensation has
evaporated before turning on your monitor to avoid causing fire, electric shock, or
component damage.
•
Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with your monitor. When a cart is used, use caution when
moving the cart/monitor combination to avoid injury from tip-over. Do not place
your monitor on an unstable cart, stand, or table. If your monitor falls, it can injure
a person and cause serious damage to your monitor. Use only a cart or stand
recommended by the manufacturer or sold with your monitor.
•
A distance of at least 3 feet should be maintained between your monitor and any heat
source, such as a radiator, heater, oven, or amplifier. Do not install your monitor close to
smoke. Operating your monitor close to smoke or moisture may cause fire or electric shock.
•
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To
ensure reliable operation of your monitor and to protect it from overheating, make sure
that these openings are not blocked or covered. Do not place your monitor in a bookcase
or cabinet unless proper ventilation is provided.
•
Never push any object into the slots and openings on your monitor cabinet. Do not place
any objects on the top of your monitor. Doing so could short-circuit parts, causing a fire or
electric shock. Never spill liquids on your monitor.
•
Your monitor should be operated only from the type of power source indicated on the
label. If you are not sure of the type of power supplied to your home, consult your dealer or
local power company.
•
The power cord must be replaced when using different voltage than the voltage specified.
For more information, contact your dealer.
•
Your monitor is equipped with a three-pronged grounded plug (a plug with a third
grounding pin). This plug will fit only into a grounded power outlet. This is a safety feature.
If your outlet does not accommodate the three-pronged plug, have an electrician install
the correct outlet, or use an adapter to ground your monitor safely. Do not defeat the
safety purpose of the grounded plug.
•
Power is always flowing into your monitor when it is connected to a power outlet. To
completely disconnect power, unplug the power cord.
•
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of un-isolated, dangerous voltage
within the inside of your monitor that may be of sufficient magnitude to
constitute a risk of electric shock to persons.