Verizon GT704WGB - Manual (Page 88)

Wireless DSL Gateway User Manual
10/16/08
87
© 2008 Verizon. All Rights Reserved.
8.2 Restore Default Settings
To restore the Gateway to its factory default settings, select Restore Default
Settings from the Utilities screen. When the “Restore Default Settings” screen
appears, click Restore Default Settings. Any changes made to the Gateway’s
settings will be lost and the factory default settings restored. During this process,
the Gateway’s Power light flashes and the Gateway is disabled.
Warning : Do not unplug the Power cord from the Gateway during the Restore
Default Settings process. Doing so may result in permanent damage to the
Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is
fully operational.
8.3 Upgrade Firmware
Selecting Upgrade Firmware in the Utilities screen generates the “Upgrade
Firmware” screen. Firmware upgrades are periodically released to enhance
the Gateway’s capabilities. Follow the instructions on-screen to upgrade the
Gateway’s firmware.