Vision Fitness T9400HRT - Manual (Page 7)

7
3
STEP
3
STEP
MODELS T9200, T9300, T9400HRT,
T9500HRT, T9600HRT: Plug in the
small data cable into the small plug
connection on the lower control
board. Plug in the large data cable
into the large plug connection on the
lower control board.
MODELS T9700HRT & T9700S: Plug
the large 20 ribbon cable into the 20
pin connection on the lower control
board. Slide down the rubber covers
on the left & right console supports.
• Install the motor cover making sure
that the rubber covers are inserted into
the motor cover. Secure the motor
cover using the six (M5 x 10L) screws.
DATA CABLES