VocoPro CDG-8800PRO - Manual (Page 13)

11
Starting Playback
• Press the PLAY/PAUSE button dur-
ing the pause or cue condition to
start playback, the PLAY indicator
lights up.
• The point at which playback starts is
automatically stored in the memory
as the cue point. The disc then
returns to the cue point when the CUE button is
pressed. (Back Cue)
Stopping Playback
There are two ways to stop playback:
• Press the PLAY/PAUSE button during playback to
pause at that point.
• Press the CUE button during playback to return to the
cue point. This will cause the music to pause.
Pausing
• Press the PLAY/PAUSE button to switch between play
and pause.
Cueing
“Cueing” is the action of preparing for playback.
• Press CUE button, the player will
enter cue mode, the playback
returns to cue point and pauses,
the cue indicator lights up and the
play indicator flashes. When PLAY/
PAUSE button is pressed, play
starts from the cue point.
• When the track search operation is completed after
pressing the SKIP buttons, the player automatically
finds the position at which the sound starts and will cue
at that position(Auto Cue).
• If the CUE button is pressed after the search operation
or the scanning operation, the playback returns to cue
point and enters and becomes paused.
• Cue point setting: When play starts from pause or skip
to a new track by using skip button, the begin play point
will be set to the new cue point. When a new cue point
is set, the cue indicator lights by flashing for about 1
second.
NOTE: During cue mode, if the CUE button is pressed and
held, playback will start from the cue point. When the
button is released, the player will return to the cue mode
automatically, it allows you to check the cue point.
CAUTION: Do not place any foreign objects in the disc
tray, and do not place more than one disc in the disc
tray at a time.Do not push the disc tray in manually
when the power is off, as this may result in malfunc-
tion and damage to the player.
Selecting Tracks
• Press the SKIP button once to move to next higher or
lower track.
• Hold the SKIP button to change tracks continuously at
a higher speed.
• When a new track is selected during playback, play-
back begins as soon as the skip operation is
completed.
• If the skip forward button is pressed while at the last
track, the first track is selected. In the same way, if the
skip backwards button is pressed while at the first
track, the last track is selected.
Opening and Closing the Disc Tray
• Turn the unit power on. Press the OPEN/CLOSE button
to open the disc tray. OPEN/CLOSE buttons are pro-
vided on both the main unit and control unit.
• The disc tray cannot be opened during playback in
order to prevent playback from being interrupted if the
OPEN/CLOSE button is pressed accidentally. Stop the
playback first, then press the OPEN/CLOSE button.
Loading discs
• Hold the disc by the edges and place it in the disc tray,
then press the OPEN/CLOSE button again to close the
disc tray. The unit will show the total track number and
the total playing time for about 2 seconds then enter
the cue condition. The cue point will be set to the music
starting point of the first track automatically.
Operations
CUE