Getting connected, Connecting the external controller to the player, Connecting to an audio system (mixer, amp, etc.) – VocoPro CDG-8800PRO User Manual
Page 9: Connecting to a tv or monitor
Advertising
7
Connecting the external controller to the player
Getting Connected
Connecting to an Audio System (Mixer, Amp, etc.)
Using L/R RCA cables, connect the AUDIO OUT on each CDG-8800 PRO deck to the AUDIO IN on a mixer or amp.
Connecting to a TV or Monitor
Using an RCA cable (yellow), connect the VIDEO OUT on each CDG-8800 PRO deck to the VIDEO IN on a TV or
monitor. NOTE: If your TV or monitor has only one video input, you may need a video switching device or a mixer
with video switching.
+
-
+
-
LTV-5 (not included)
PKJ 9090 PRO (not included)
Using the included remote cables connect Remote
1 on the remote to Main Unit 1 on the player and
connect Remote 2 to Main Unit 2.
Advertising