Vision Fitness X6600HRT/DA - Manual (Page 7)

7
4
STEP
• Slide right upper arm into right
upper handlebar bracket.
• Tighten the top bolt (M8) on the arm
bracket connection block, using the
6
MM L-shaped Allen wrench.
• Attach plastic arm bracket cover to
the front of the arm bracket connection
block. This is a snap fit.
• Attach the plastic logo endcap to
the side of the arm bracket connection
block. This is a snap fit.
• Repeat the above steps on the left
side.
• Attach water bottle bracket with the
included screws.
GREEN BAG
4
STEP