VIEWSONIC VS13915-1M - Manual (Page 8)

ENGLISH
vi ViewSonic VT3205LED
This production contains Bitstream Vera Sans fonts under the •
following copyright.
Copyright © 2003 by Bitstream, Inc. All Rights Reserved.
Bitstream Vera is a trademark of Bitstream, Inc.
IMPORTANT SAFETy
INSTRUCTIONS
Read these instructions completely before using the 1.
equipment.
Keep these instructions in a safe place. 2.
Heed all warnings. 3.
Follow all instructions. 4.
Do not use this apparatus near water. 5.
Clean with a soft, dry cloth. 6.
Do not block any ventilation openings. 7.
Install the equipment in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such 8.
as radiators, heat registers, stoves, or other
devices (including amplifiers) that produce
heat.
Do not attempt to circumvent the safety provisions of the 9.
polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The
wide blade and the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult an
electrician for replacement of the outlet.
Prevent the power cord from being tread upon or pinched,
10.
particularly at the plug, convenience receptacles, and the
point where they exit from the device. Be sure that the
power outlet is located near the equipment so that it is
easily accessible.
Only use attachments/ accessories specified by the 11.
manufacturer.
Use only with the cart, stand, tripod, bracket,
12.
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
Unplug this apparatus when it will be unused for a long
13.
period of time.
Refer all servicing to qualified service personnel.
14.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain
or moisture, or the unit does not operate normally, or has
been dropped.
USE
AC power Cord
Keep the following guidelines to protect the AC power cord from
being damaged. If the AC power cord is damaged, it may result
in a fire or an electric shock. Stop using it and ask your dealer or
ViewSonic service center to exchange it.
Do not place the TV where the power cord is subject to wear •
or abuse.
Do not pinch, bend, or twist the cord excessively.
•
The core lines may be bared and cut, causing a short-circuit, •
and resulting in a fire or an electric shock.
Do not convert or damage the power cord.
•
Avoid power cord being rolled over or rested •
upon.
When the power cord is plugged in, do not move the TV.
•
Keep the power cord away from heat sources. •
When you disconnect the AC power cord, disconnect it from •
the wall outlet first.
When disconnecting the power cord, grasp the plug instead of
•
pulling the power cord.
Use only an original ViewSonic AC power cord, not other
•
brands.
Do not use the supplied AC power cord on any other
•
equipment.
Wall outlet
Insert the plug fully into the outlet. If it is loose,
do not use it. Doing so may cause arcing and
result in a fire. Contact your electrician to change
the outlet.
Wiring
For your safety, be sure to unplug the AC power cord when
connecting cables.
Take care not to trip on the cables. It may cause damage to the
TV set.
Electric shock
Do not touch the AC power cord or the TV with a
wet hand. If you plug/unplug the AC power cord
from the TV with a wet hand, it may cause electric
shock.
Lightning storms
During a lightning storm, unplug the TV from the wall outlet and
disconnect the antenna to prevent damage to the TV.
When not in use
If you will not be using the TV set for long periods of time, the
TV set should be disconnected from the AC power outlet to
prevent power line surges. The TV set is not disconnected from
the AC power source when the TV set is switched off.
To disconnect the TV set completely, unplug from the AC power
outlet.
Overloading
This TV set is designed to operate on a 120V
AC supply only. If there are too many appliances
connected to the same AC power outlet, it could
result in a fire or an electric shock.
Optional equipment
If optional equipment is to be installed, leave some space
between optional equipment and the TV set. Picture distortion
and/or noisy sound may occur if the TV set is positioned in close
proximity to any equipment emitting electromagnetic radiation.
Small accessories
Keep small accessories in a safe place where children are unable
to reach.