Vision Fitness ST720 - Manual (Page 14)

14
4
STEP
• Grab the seat back support (AT1) and
align the holes at the end of the tube with
the open holes in the sliding seat bottom
assembly (AH1). Connect with arrow up
using one bolt (M10x140), two flat washers
(10.2x22x2), and a nylon nut (M10). Lay
the seat back support so that it rests on
seat back support post (AT3).
• On each side of the seat back support
(AT1), attach the seat back connecting
braces (HO9) using one bolt (M12x152),
two flat washers (13x26x2.5), and one
nylon nut (M12). Attach the other side of
the connecting braces to the main floor
support (AC1) directly underneath the seat
back support post. Secure with one bolt
(M12x152), two flat washers (13x26x2.5),
and one nylon nut (M12).
GREEN BAG
Connect with
arrow up