Binatone MGR-1000 - Manual (Page 5)

5
ENGLISH
SPECIAL SAFETY
PRECAUTIONS
Before plugging in the appliance, carefully exam-
ine it to make sure there are no visible signs of
mechanical damage and that the cutting discs and
blades are properly installed and securely fixed.
If during operation you smell burning, hear
strange sounds, or experience a decline in the op-
erating power, immediately unplug the appliance
and clean the meat grinder. If after cleaning the appliance does not
resume normal operation, contact an authorized service center.
To avoid personal injuries when feeding the meat into the appli-
ance only use the pusher supplied with the grinder. Do not feed
the meat with your hands.
Do not switch on the appliance when empty.
Before replacing the cutting discs and attachments unplug the ap-
pliance from the wall socket.
Do not lift and move the meat grinder during operation. Any mov-
ing of the appliance should be made after the power is switched
off.
Do not operate the meat grinder for more than 15 minutes at a
time.
DESCRIPTION OF THE
APPLIANCE
Figure A:
1. Housing with an electric motor
2. Stainless steel cross-shaped cutter
3. 3 stainless steel perforated discs with holes of dif-
ferent diameters
4. Screw
5. On/Off button
6. Reverse button
7. Meat feed pan
8. Stainless steel operating unit with a funnel for meat feeding
9. Power cord storage compartment (see figure B)
10.Non-slipping feet
11.Operating unit locking knob
12.Seal ring
13.Attachment for kebbe making
14.Cone-shaped tip for sausage making
15.Pusher