Williams Sound WIR 239 - Manual (Page 7)

®
7
TV Microphone
If an RCA connection is unavail-
able, use the provided TV micro-
phone to pickup the sound source
directly from the TV loud speak-
er as shown on right.
TX238
TX238 Transmitter (Rear View)
S
TEP
1: C
ONNECT THE
T
RANSMITTER
P
OWER
S
UPPLY
Plug the Power Supply cord into the “DC 12V” jack
1
on the
back of the TX238. Then plug the Power Supply into an AC
outlet. When the receiver is placed into the charging cradle built
into the top of the transmitter, the center charging indicator on
the front of the TX238 will turn on. When the spare battery is
plugged into the left or right battery charging port on the trans-
mitter, the corresponding charge indicator light will turn on.
S
TEP
2: C
ONNECT THE
T
RANSMITTER TO THE
A
UDIO
S
OURCE
Use the supplied red and white RCA audio cables to connect the
TX238 Transmitter directly to the TV, VCR, or stereo “AUDIO
OUT” jacks. If your television does not have “AUDIO OUT”
jacks, you will need use the supplied TV microphone. See page
9 for TV microphone instructions.
5
1 2 3
4
OR