Williams Sound WIR 239 - Manual (Page 9)

®
9
S
TEP
3 (
CONTINUED
):
If an RCA connection is unavailable, use the provided
TV MICROPHONE
5
to pickup the desired sound source.
Plug in the microphone into the Mic Jack on the rear of the
TX238 Transmitter
4
. Use the velcro strip supplied to attach
the microphone near the loudspeaker
4
of your TV or stereo.
The microphone will allow you to play the TV at lower volume
for other listeners and will pick up other important sounds like
the telephone or doorbell ringing.
Connect the LEFT RCA plug from the TV or
VCR audio output into the LEFT RCA jack on the
TX238 Transmitter
3
(the right jack should be
left unplugged). Next, slide the stereo/mono
switch to the “
” mono position
2
. The trans-
mitter is now set for 2.3 MHz operation.
Connect the LEFT RCA plug from the TV or VCR
speaker output into the RIGHT RCA jack on the
TX238 Transmitter
3
(the left jack should be left
unplugged). Next, slide the stereo/mono switch
2
to the “ ” mono position. The transmitter is now
set for 2.8 MHz operation.
Compatible with:
Compatible with:
RX239
RX237
-or-
RX238
-or-
RX237
-or-
RX238
2.3 MHz (MONO) OPERATION:
2.8 MHz (MONO) OPERATION: