Wizcom InfoScan TS Elite - Manual (Page 21)

The Pen Applications
19
or tap them in.
c. Select to close the Virtual Keyboard.
The edited text should appear on the screen:
4. Cross-referencing words using the installed
dictionaries
a. Using the stylus, tap the word 'device'. The blinking
cursor should appear at the point you tapped.
b. Select from the Notes toolbar.
Note:
ƒ If this is your first time using this function, and there
is more than one dictionary on the Pen whose
source language matches the current scanning
language, the Select Dictionary pop-up will
appear. Select the AHD Office dictionary. If you
have already used this function, go to and
choose Select Dictionary.
ƒ If there is only one dictionary corresponding to the
current scanning language, this dictionary will be
selected automatically.
A pop-up similar to the following should be visible. The
dictionary entry will vary depending on which dictionaries
are installed on your Pen.
c. Scroll through the dictionary entry using and .
d. Select or press ESC to close the pop-up.