Wizcom InfoScan TS Elite - Manual (Page 31)

The Pen Applications
29
On the Pen:
Scan to PC has two modes: Auto Send and non-Auto
Send. The Pen's default setting is Auto Send.
Using Auto Send mode:
1. In confirm that the Auto Send option is on
(checked), and that appears on the top of the screen.
2. Scan the following line:
Auto Send mode sends my text directly to the PC.
The 'Sending...' message appears on the Pen Screen:
Sending text to the PC
The scanned text is sent to the PC with the following result:
The scanned text appearing in the MS Word file
Using non-Auto Send mode:
1. In change the Auto Send option to off (not checked),
and see that (the Send icon) is now visible in the
toolbar.
2. Scan the following line:
Select Send to send this text to the PC.