weber 89796 - Manual (Page 8)

8
WWW.WEBER.COM ®
ƽ DANGER
Use of any other hose and regulator assembly could be
dangerous, and may not provide adequate gas supply to
the Summit
®
Built-In gas grill, and could result in a fi re or
an explosion causing serious bodily injury or death, and
damage to property.
ƽ DANGER
Failure to use the Summit
®
Built-In Tank Cabinet for a 20 lb
cylinder or failure to build a LP cylinder enclosure for a 20 lb
cylinder following the requirements for ventilation, cylinder
retention and separation of the LP cylinder from a heat
source, listed in the ANSI Standard for Outdoor Cooking Gas
Appliances, ANSI Z21.58 CSA 1.6, could be dangerous, and
could result in a fi re or an explosion causing serious bodily
injury or death and damage to property.
CONNECT GAS SUPPLY
1) Uncap the fl are fi tting from the optional side burner connection located inside the
Summit
®
Built-In Tank Cabinet (#21280).
Note: We strongly recommend that you use the Summit
®
Built-In Tank Cabinet (#21280)
for installations using a 20 lb LP cylinder, mounted remotely in an “island” structure.
If your, licensed contractor or licensed plumber, builds an LP cylinder enclosure
following the guidelines in the ANSI Standard for Outdoor Cooking Gas Appliances,
Z21.58 CSA 1.6, you need to order kit number (#21287).
2) Connect the corrugated gas line to the side burner Connection.
If you do not follow the DANGER statements exactly, the Warranty on the Summit
®
Built-
In gas grill will be voided.
a.
c.
b.
1
3
4
5
6
2
SIDE BURNER LP SUPPLY CONNECTIONS
1 Corrugated Gas Line to Manifold
2 Plug unused hole with supplied plug
3 Use bushing for gas line hole
4 1/2” (12.7mm) Flared Gasket
5 90° Fitting
6 Cap (Optional Side Burner)
7 To SIde Burner
8 Connection to LP Tank
a Top of Box
b Back of Box
c Side View
b.
a.
2
5
7
8
c.
GAS INSTRUCTIONS