Wegener Communications IPUMP 562 - Manual (Page 37)

www.wegener.com 800092-01 Rev. A 27
Unity 552 User’s Manual
Figure 3.16: iPump 562 OSD LAN IP Setup
Use the LAN IP Setup screen to set and display the networking configuration.
Table 3.10: Networking Configuration Settings
Set Terminal options
Use following steps to display Terminal Setup screen on the OSD menu:
1. Navigate to the Unit Setup screen, see Unit Setup screen on page 23.
2. Press the down arrow button to select Terminal Setup .
3. View the details as shown in Figure 3.17 .
Option Possible values Comments
LAN Configuration Static or DHCP
LAN IP Address - IP Address
LAN Netmask - IP Net-mask
LAN Gateway - IP Gateway Address