Wasp Bar Code Wasp WPL305 - Manual (Page 17)

2D: PDF-417, Maxicode, and DataMatrix.
Command Set WPL
Environment
Operation Temperature: 5 ~ 40 .
Relative Humidity: 25% ~ 85% (Non Condensing).
Storage Temperature: -40 ~ 60 .
Relative Humidity: 10% ~ 90% (Non Condensing).
7.2 Label Stock Specifications
Item Specification
Type Label (Continuous , Die-cut , Fan-fold).
Wound Type Outside wound.
Width 20mm ~ 112mm (0.78” ~ 4.4”).
Length 10mm ~ 1000mm (0.4” ~ 39”).
25.4mm ~ 1000mm (1” ~ 39”).(for peeler and cutter)
Thickness 0.06mm ~ 0.19mm. (2.3~7.4 mil), max. 150g/m 2
Roll Diameter 5”.
Roll Core Diameter 25.4mm ~ 76.2mm (1” ~ 3”).
Gap Height 2mm min.
Black Mark Height 2mm min.
Black Mark Width 8mm min.
7.3 Ribbon Specifications
Item Specification
Type Wax, Wax / Resin, Resin.
Core Diameter 1".
Width Max 110mm.
Capacity 300m with 1" core.
Wound Type Outside wound.
Ribbon End Clear or silver end tape.
7.4. LED and Button Operation
LEDColor Description
Green
Orange
Red
The power is on and the device is ready to use.
The system is detecting the paper and ribbon status.
Printing error, such as paper empty, ribbon empty,
cover opened, etc.
15