Fagor 2V-32TS - Manual (Page 16)

e n g l i s h
14
fl ash (2.8.7). Select the time with , on
the clock (2.8.8). After 5 seconds the time
will be set and the power and will be
displayed alternately on the timed element.
Once the time has passed, you will hear
a sound and
00
will fl ash. To cancel the
timing, press on the icon until
00
is
displayed.
N.B.: The timer will automatically turn itself off
if you take longer than 10 seconds to select
the time.
Models e: Once an element has been
activated and the power selected, press
again the selection key of the element to
be timed, and a will appear. (2.8.11).
Select the time with , (2.8.12) and set
it by pressing the timed element key again
(2.8.13). The power will be displayed with a
dot indicating that the element is on a timer.
You will hear a sound and see to indicate
that the time has passed (2.8.14). Press any
key and the sound will stop.
N.B.: The timer will automatically turn itself off
if you take longer than 10 seconds to select
the time.
Observations on timing: If the power level is 9,
the maximum time for the timer will be 60 min.
Otherwise, the maximum will be 99 min.
Once the time has passed, the alarm will sound
until you press any key.
PROGRAMMING FUNCTIONS
2.9 Rapid heating. Reaches maximum
temperature quickly to automatically go to
the constant temperature.
Models abc: Activates an element and takes
the bar to the maximum power. Press
and a will appear on the display screen
of the selected element (2.9.1). You have 5
seconds to select the desired level, you are
advised to use levels from 3 to 6 (2.9.2). After
fi ve seconds the rapid heating will be set
and will appear on the display screen of the
selected element (2.9.1). You have 5 seconds
to select the desired level, you are advised
to use levels from 3 to 6 (2.9.2). After fi ve
seconds the rapid heating will be set and
and the power will be displayed alternately.
Once the maximum temperature has been
reached, will disappear, leaving the
power constant. The element will continue
operating in the conventional way. If you want
2.4 Selecting the power. Adjust it by sliding
your fi nger along the bar (2.4.1) or by
pressing or (2.4.2, 2.4.3).
SPECIAL ELEMENTS
2.5 Double element, Triple element. Once you
have selected the power, press
,
and this will activate the double element
(2.5.1, 2.5.3). If you press
(2.5.2) or
(2.5.4) again, this will activate the triple
element. To cancel, press (
,
,
,
).
2.6 Large hotplate. You can use this element
in a circular way
or in a joint way,
as a large hot plate
. Press to
activate it and press again to deactivate it.
Recommendation: on the models with halogen
elements, the light is so bright that we advise
you not to look at it when it is on without the
receptacle.
TIMER FUNCTIONS
2.7 Setting the time
. When the hob is
plugged in, the digits on the clock will fl ash
and will show
(2.7.1). Adjust the
time with the keys , (2.7.2). Follow
the same procedure whenever the appliance
is unplugged or the power supply is cut off.
To change the time, press the
key for 5
seconds (2.7.3). The time will start to fl ash
and you will hear a beep; adjust it with the
keys , .
2.8 Selecting the time.
Models abc: Once an element has been
activated and the power selected, you have
5 seconds of fl ashing in which to press the
key (2.8.1). Select the time required by
pressing , (2.8.2). After fi ve seconds
the timer is set and the time will be displayed
with an illuminated dot beneath the icon of
the timed element (2.8.3). To alter or see the
time remaining, press the icon of the timed
element (2.8.4). To cancel the programming,
press the , keys simultaneously
(2.8.5).
Models dfghkmo: Once an element has
been activated and the power selected,
press the key on the clock.
00
and a
will appear on each element (2.8.6). Press
on the element to be timed and will