Western Digital WDE2170 - Manual (Page 23)

WD Enterprise WDE2170/WDE4360 Specifications
4079-001045 Rev. B RELEASED 04-08-97 15
Operating Vibration
WD Enterprise drives are tested by applying a continuous swept sine excitation in each
linear axis, one axis at a time. Sweep rate is one octave per minute.
The drive incurs no physical damage and no hard errors while subjected to continuous
vibration not exceeding the level listed in Table 2-10. Operating performance may
degrade during periods of vibration application.
Non-operating Vibration
Note: This specification applies to handling and transportation of unmounted drives.
Drives are tested by applying a continuous swept sine excitation in each linear axis, one
axis at a time. Sweep rate is one octave per minute.
The drive incurs no physical damage when subjected to continuous vibration not
exceeding the level listed in Table 2-10.
Packaged Shock and Vibration
The shipping packaging is designed to meet the National/International Safe Transit
Association (N/ISTA) standards for packaged products.
The drive incurs no physical damage when subjected to the N/ISTA standards.