Weider 740 - Manual (Page 21)

WESY74091 R0101A
Note: Assembly is divided into three stages: 1) frame assembly; 2) arm
assembly; 3) cable, pulley, and seat assembly. The hardware for each
assembly stage is packaged separately. Wait until you begin each stage
to open that parts bag.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL
This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part. Important: Some parts may have been pre-assembled for
shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.