White Rodgers EMERSON BLUE 1F98EZ-1441 - Manual (Page 10)

10
Permanent Temperature Hold
The Permanent Temperature Hold
feature bypasses the program and allows
you to permanently hold a temperature.
The temperature you set in Hold will
be maintained indefinitely. Touch Run
Schedule to cancel Hold and resume the
programmed schedule.
Touch or keys to adjust the tem-
perature. The Hold key will appear on the
screen. Touch the Hold key to maintain
the new setpoint temperature. “Hold
At” will display to the left of the setpoint
temperature. To cancel the permanent
hold setting at any time and return to the
program, touch Run Schedule.
Example: If you turn up the heat during
the Morning program and touch the Hold
key, it will remain at the new temperature
until you touch Run Schedule or you
manually adjust to another temperature.
Choose the FAN Setting
(Auto or On)
FAN Auto is the most commonly select-
ed setting and runs the fan automatically
when the heating or cooling system is .
FAN On selection runs the fan continu-
ously for increased air circulation or to
allow additional air cleaning.
Non-Programmable Mode
If Program days per week is set for 0
days (Non-programmable) in the Ther-
mostat Options Configuration Menu, the
thermostat will not follow any program
periods. Time of day and day of week will
not display. Touch the SYSTEM key to
select Heat or Cool and use the
or
buttons to adjust the temperature to your
desired setting.
Auto Mode
In Programmable mode or Non-program-
mable mode, you can touch the SYSTEM
key to select Auto to allow the thermo-
stat to automatically change between
Heat and Cool. When the SYSTEM key
is touched to select Auto the thermostat
will change to Heat or Cool, whichever
ran last. If it switches to heat but you
want cool, or it changes to cool but you
want heat, touch both
or keys
simultaneously to change to the other
mode.
USA
GE GUIDE