Weider WEEVSY87210 User Manual
Page 16
Advertising
16
28. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE WEIGHT SYSTEM, beginning on page 17.
Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over
the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the
cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE
DIAGRAM on page 22 for proper cable routing. If there is any slack in the cables, the cables should
be tightened. See TROUBLESHOOTING AND MAINTENANCE.
Advertising