Weider WESY49202 - Manual (Page 16)

16
34. Wrap the Military Press Cable (72) around a
“V”-Pulley (50). Attach the Pulley to the Top
Frame (55) with an M10 x 55mm Bolt (86)
and an M10 Nylon Locknut (21).
Wrap the Military Press Cable (72) around a
90mm Pulley (15). Attach the Pulley to the
indicated bracket on the Assist Arm (105) with
an M10 x 45mm Bolt (76) and an M10 Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
35. Wrap the Military Press Cable (72) around a
“V”-Pulley (50). Attach the Pulley and a Long
Cable Trap (31) to the Assist Upright (74) with
an M10 x 105mm Bolt (112), an M10 Washer
(9), and an M10 Nylon Locknut (21). Be sure
that the Long Cable Trap is turned to hold
the Cable in place and that the Cable is
routed around the Pulley as shown.
Wrap the Military Press Cable (72) around a
90mm Pulley (15). Attach the Pulley to the
other bracket on the Assist Arm (105) with an
M10 x 45mm Bolt (76) and an M10 Nylon
Locknut (21). Be sure that the Cable is
between the Pulley and the Assist Arm and
that the Cable and Pulley move smoothly.
34
CABLE ASSEMBL
Y
Bracket
105
76
50
15
21
21
55
86
72
35
105
9
21
74
50
31
15
76
72
Bracket
112