Weider WESY49202 - Manual (Page 19)

19
40. Locate and open the parts bag labeled
“SEAT ASSEMBLY.”
Insert an M6 x 60mm Carriage Bolt (92)
through the center hole in a Seat Plate (37).
Attach the Seat Plate to the Rear Backrest
(85) with two M6 x 16mm Screws (18).
Insert the M6 x 60mm Carriage Bolt (92)
through the indicated hole in the Leg Press
Upright (56). Tighten an M6 Nylon Locknut (2)
with an M6 Washer (10) onto the Carriage
Bolt. Attach the top of the Rear Backrest (85)
to the Leg Press Upright with an M6 x 65mm
Screw (43) and another M6 Washer.
41. Attach one end of a Seat (13) to the Rear
Seat Frame (100) with two M6 x 16mm
Screws (18). Attach the other end of the Seat
to the Rear Seat Frame with an M6 Washer
(10) and an M6 x 65mm Screw (43).
42. Attach the Assist Seat (104) and the Angle
Bracket (110) to the Assist Arm (105) with four
M6 Washers (10), two M6 x 70mm Screws
(114), and two M6 x 65mm Screws (43).
SEA
T ASSEMBL
Y
42
40
41
85
2
10
18
92
56
37
43
18
18
13
10
43
10
10
43
114
104
105
100
110