Check for gas leaks, Remove control panel and front panel, Ƽwarning – weber 400 User Manual

Page 10

Advertising
background image

10

The control panel is separate from the front panel. The
control panel needs to be removed before the front panel
can be removed. Figure 17.

Figure 16

Figure 17

Burner control knobs

Ignition button

Control

panel

Front

panel

Front edge of the
control panel

Put your fingers under the front edge of the control panel
and lift up and pull evenly toward you. Figure 18 (a).

Pull the front panel up and out of the cooking box
assembly. Figure 19.

Figure 18

(a)

Figure 19

Front Panel

Control Panel

Front panel

Remove control panel and front panel

Take off all 4 burner control knobs. Pull up on the ignition
buttons until they stay in the up position. Figure 16.

ƽ

WARNING

The gas connections of your Weber Gas
Barbecue have been factory tested. We do
however recommend that you leak check
all gas connections before operating your
Weber Gas Barbecue.

CHECK FOR GAS LEAKS

Advertising