weber 400 - Manual (Page 12)

12
REINSTALL FRONT PANEL
You will need: control panel, front panel, and four burner
control knobs.
With the Weber logo to the left, slide front panel down
into place. Figure 22.
Figure 22
Figure 21
b)
a)
a) Hose to regulator connection. Figure 21 (a).
b) Regulator to tank connection. Figure 21 (b).
c) Hose to bracket connection. Figure 21 (c).
ƽ
WARNING: If there is a leak at connections
20 (a), 20 (b), 21 (a), or 21 (b), turn OFF the gas. Do
not operate the barbecue. Contact your dealer.
ƽ
WARNING: If there is a leak at connection 21 (c)
retighten and recheck for leaks with soap and water.
When leak checks are complete, turn gas supply OFF at
the source and rinse connections with water.
CHECK FOR GAS LEAKS
(CONTINUED)
c)