Wolf Appliance Company GAS COOK TOPS - Manual (Page 4)

B E F O R E Y O U S T A R T
Proper installation is your responsibility.
Have a qualified technician install this
cooktop. You must also assure that electri-
cal installation is adequate and in compli-
ance with all local codes and ordinances.
Wolf gas cooktops are manufactured for
use with natural gas or LP gas. Please
check product rating plate for type of gas
needed.
Proper gas supply connection must be
available; refer to Gas Supply Requirements
on page 10. Electrical ground is required;
see Electrical Requirements on page 11.
Check the location where the cooktop will
be installed. The location should be away
from strong draft areas, such as windows,
doors and strong heating vents or fans. Do
not obstruct flow of combustion and
ventilation air.
Make sure you have everything necessary
for correct installation. It is the responsibil-
ity of the installer to comply with the instal-
lation clearances specified on the product
rating plate. The rating plate can be found
on the underside of the cooktop.
4
This cooktop is intended for indoor use.
C O M M O N W E A L T H O F M A S S A C H U S E T T S
Installations and repairs must be performed
by a qualified or licensed contractor,
plumber or gas fitter qualified or licensed
by the state, province, or region where this
appliance is being installed.
Use only gas shut-off valves approved for
use within the state, province, or region
where this appliance is being installed.
A flexible gas connector, when used, must
not exceed 3' (.9 m).
W O L F G A S C O O K TO P S