Wolf Appliance Company GAS COOK TOPS User Manual
Page 5
5
Dimensions in parentheses are in
millimeters unless otherwise specified.
I N S TA L L AT I O N
I N S T R U C T I O N S
L O C A T I O N R E Q U I R E M E N T S
Illustrations on the following pages provide the
overall dimensions, countertop cut-out and
installation specifications for Wolf gas
cooktops. Maintain the following minimum
installation dimensions:
Minimum horizontal clearance from the
sides and back of the cooktop cut-out to
adjacent vertical combustible construction,
extending a minimum of 18" (457) above
the countertop, is as follows: 7" (178) from
side edges of cut-out for the 15" (381)
cooktop; 9" (229) from side edges of cut-out
for the 30" (762) and 36" (914) cooktops;
2
1
/
2
" (64) from rear edge of cut-out.
Minimum vertical distance between the
countertop and combustible materials
above the cooktop must be 30" (762).
Maximum 13" (330) depth of overhead side
cabinets directly above and within side
clearance.
IMPORTANT NOTE: When installing a ventila-
tion hood, refer to the specific requirements
of the hood for the minimum dimension to
countertop.
S I T E
P R E P A R A T I O N
C O U N T E R T O P C U T- O U T D I M E N S I O N S
IMPORTANT NOTE: Countertop opening
dimensions shown on the following pages
must be used. The dimensions shown provide
for required clearances.
These cooktops are designed to fit a standard
24" (610) deep base cabinet with a 25" (635)
deep countertop. Before making the counter-
top cut-out, verify that the cooktop will clear
the side walls of the base cabinet below. There
should be at least 5
1
/
2
" (140) clearance
between the countertop and any combustible
surface directly below the unit.
If the cabinet has a drawer, a 4
1
/
2
" (114) depth
clearance from the countertop to the top of the
drawer (or other obstruction) in the base
cabinet is required. The drawer depth may
need to be shortened to avoid interfering with
the gas pressure regulator.
IMPORTANT NOTE: Do not seal the cooktop
to the countertop. It must be removed if
service is necessary.
Failure to locate the cooktop without the
proper clearances will result in a fire
hazard.