Wells Belgian Waffle Maker BWB-1S - Manual (Page 10)

MAINTENANCE INSTRUCTIONS
TIMER ADJUSTMENT
TOOLS REQUIRED: Small Flat Blade Screwdriver
1. Remove the hole plug from the rear panel of the Waffle Baker.
DO NOT remove the hole plug from the attached grounding wire.
2. Using the screwdriver, rotate the adjusting knob: clockwise to
increase time, or counter-clockwise to decrease time.
Time is adjustable from 0.1 minutes to 6.0 minutes.
3. Replace hole plug.
NOTE: The necessity to
increase baking time may
be due to carbon build-up
on the grids. Always clean
and de-carbonize the grids
prior to adjusting the timer.
8
.1
1
2
3
4
5
6
SECS
.1
1
2 3 4
5 6
BACK
VIEW
TROUBLESHOOTING
SYMPTOM POSSIBLE CAUSE SUGGESTED REMEDY
Will not heat
Power cord not plugged in, or
circuit breaker tripped Establish main power
Be sure appliance is plugged in
Power switch OFF Turn power switch ON
Internal component damage
Contact an authorized Wells
Service Agency for repairs.
Excessive carbonization of grids Decarbonize grids
Internal component damage
Contact an authorized Wells
Service Agency for repairs.
Buzzer pulses
Internal component damage
(open temp probe) Contact an authorized Wells
Service Agency for repairs.
NOTE: There are no user
serviceable components in the
cabinet or cooking grids. In all
cases of damage or malfunction,
contact your Authorized Wells
Service Agency for repairs.
Does not maintain temperature
211
307154
OpM
anual for
B
W
B-1S
Belgian
W
a
ffle Bakers