Western Digital Network hard drive - Manual (Page 19)

NETCENTER INITIAL SETUP – 15
NETCENTER
USER MANUAL
4. Step 3 - Set Date and Time. Change the current date and time as well as the time zone
region, country, and city using the drop-down lists in each field if necessary. Click Next
when complete.
5. Enter your user name and password set in step 2 above. Click OK.
6. Initial Setup-Finished! The NetCenter is now configured and ready for use. Close your
browser or click Advanced Setup and follow the steps under refer to “NetCenter
Manager” on page 24 for details on how to use the interface and set all the advanced
options and configurations for your NetCenter.