Western Digital Network hard drive - Manual (Page 22)

NETCENTER INITIAL SETUP – 18
NETCENTER
USER MANUAL
Initial NetCenter Configuration
1. Click Configure in the EasyLink screen (see step 3 above) to set advanced options for
your NetCenter.
2. Initial Setup-Welcome. Click Next.
3. Step 1-End User License Agreement. Read the license agreement and if you accept the
terms, click Accept, then click Continue.
4. Step 2-Set Password. Click in the User Name and Password fields to type in a new user
name and password. Retype the password in the Confirm Password field, then click Next
when finished.
5. Step 3-Set Date and Time. Change the current date and time as well as the time zone
region, country, and city using the drop-down lists in each field if necessary. Click Next
when complete.
6. Enter your user name and password set in step 2 above. Click OK. Refer to “NetCenter
Manager” on page 24 for details on how to use the interface and set all the advanced
options and configurations for your NetCenter.
Important: WD recommends setting the user name and password fields to protect
NetCenter Manager from unauthorized access.