Western Digital Network hard drive - Manual (Page 8)

GETTING STARTED – 4
NETCENTER
USER MANUAL
Recording Your WD Product Information
In the following table, write the serial number and model number of your new WD product
found on the large label on the back panel. Also, write the purchase date and other notes such
as your operating system and version. This information is necessary for setup and technical
support.
Registering Your WD Product
Your WD product includes 30 days of free technical support during the applicable warranty
period for your product. The 30-day period commences on the date of your first telephone
contact with WD technical support.
Register online now at register.wdc.com .
Handling Precautions
WD products are precision instruments and must be handled with care during unpacking and
installation. Drives may be damaged by rough handling, shock, or vibration. Be aware of the
following precautions when unpacking and installing your NetCenter:
„
Do not unpack the NetCenter until you are ready to install it.
„
Do not drop or jolt the NetCenter.
„
Do not move the NetCenter when it is powered up.
„
Do not use the NetCenter as a portable device.
„
Do not attempt to open the NetCenter and service it yourself. Removing the cover may
expose you to harmful electrical voltages and will void the warranty.
„
To allow proper ventilation, do not block air slots on either side, top, or rear of the
enclosure. Do not stack any objects on top of the drive that may block ventilation.
CAUTION: Do not remove, tear, or damage the tape seal or any labels on the drive; these
actions will void the warranty.
WD Product Serial Number:
WD Product Model Number:
WD Product Purchase Date:
NetCenter User Name:
NetCenter Password:
System and Software Notes:
CAUTION: This product contains no user-serviceable parts. Refer servicing only to
authorized WD personnel or a WD-approved service center.