Western Digital Network hard drive - Manual (Page 9)

SETTING UP THE NETCENTER – 5
NETCENTER
USER MANUAL
Setting Up the NetCenter
This section contains instructions for positioning, connecting, and powering up the
NetCenter drive.
NetCenter Front and Rear View
„
Power button—Turns the NetCenter on or off
„
Power button light—Indicates drive activity. The drive is ready for use when the light
glows blue steadily.
„
USB 2.0 ports—Connect to up to two USB devices such as printers or external hard
drives.
„
Ethernet port—Connects to an open router or network switch port using an Ethernet
cable.
„
Power supply socket—Connects to the supplied power adapter and cable.
„
Reset button—Resets the NetCenter’s network configuration, device name, and
password without erasing shared folders or volumes. See “Resetting the NetCenter” on
page 8 for more information on using the reset button.
„
Kensington ® security slot—Connects to security cable and lock.
Installing the Stands for Vertical Placement
1. With the NetCenter powered off, disconnect all
cables.
2. Place the drive upside down on a clean and steady
surface.
3. Press a stand onto the bottom panel of the unit
until it snaps into place.
4. Repeat this process for the other stand.
CAUTION: Do not drop or jolt the NetCenter!
3
Power button Power button light
Front view Rear view
USB 2.0 ports
Ethernet port
DC power supply socket
Reset button
Kensington security slot