Wolf ICBIM15 - Manual (Page 13)

14
W O L F MULTI-FUNCTION CO O KTO P
I F Y O U N E E D SERVICE
For service in your area, contact either your
Wolf dealer or visit the Locator section of
our website, wolfappliance.com to find the
regional distributor by country.
When calling for service, you will need the
model and serial number of your multi-
function cooktop. Both numbers are listed
on the rating plate, located on the under-
side of the cooktop. Refer to the illustration
on page 5.
IMPORTANT NOTE: Installation and service
must be performed by a qualified installer or
service agency.
CO O KTO P R E M O V A L
If it is necessary to remove the multi-function
cooktop for cleaning or service, shut off the
gas supply. Disconnect the gas and electric
supply. Remove the mounting brackets on the
right and left side of the burner box and
remove the cooktop. Reinstall in the reverse
order and check the gas connection for leaks.
TRO UBLE S H O O T I N G
IMPORTANT NOTE: If the multi-function
cooktop does not operate properly, follow
these troubleshooting steps:
Verify that power is being supplied to the
cooktop.
Check the gas supply and electrical
connections to ensure that the installation
has been completed correctly.
Refer to the Troubleshooting Guide in the
Wolf Multi-Function Cooktop Use & Care
Information.
If the cooktop still does not work, contact
your Wolf dealer or regional distributor. Do
not attempt to repair the cooktop yourself.
C O N T A C T
I N F O R M A T I O N
Website:
wolfappliance.com