Wyse Technology TM 9000 Series - Manual (Page 26)

14
After power connection, the power LED will remain amber for some time. The user must
not press the power button until the amber light is off. When the amber light is off, lightly
press the power button on the Thin Client to turn on power.
Mounting and Connecting the Thin Client
The Quick Start Guide (included in the shipping carton) provides instructions for mounting
and connecting the Thin Client. The Thin Client can be placed on a desktop, or it can be
mounted on a wall using an optional wall-mount bracket available from Wyse Technology.
Caution
Mount and connect the Thin Client only as directed in the Quick Start Guide
(and in the wall-mount bracket instructions, if used). Be sure that there is
sufficient space around the Thin Client for ventilation. Follow all
precautions listed in the Quick Start Guide.
Note
On the Model 9235LE the power LED can stay amber for up to a minute after
plugging power into the unit. The user should not push the power button to
switch on the Thin Client until the amber light is out.
If included in the shipping carton, the following items should be used with Thin Client
installation:
• Keyboard and mouse (may or may not be included)
• Power cord (may or may not be included)
• Power supply
• Noise suppressor (ferrite bead)
• Desktop mounting stand (if required)
• Quick Start Guide
Caution
To ensure regulatory compliance, use only the power supply included in the
shipping carton, or an approved equivalent (see “Device Power Supply” on
page vii), with the Thin Client.
The noise suppressor (ferrite bead) included in the box with the Thin Client
must be installed on the network cable as described in the accompanying
instructions (for details, refer to the regulatory notices in the front matter of
this document).
Note
Clicking a scroll wheel on a mouse is supported.