Wyse Technology TM 9000 Series - Manual (Page 41)

29
Write Filter
Write Filter is available to administrators only. The Write Filter Control dialog box is shown
in Figure 18. It can be opened either through the Start | Run command line (
wtflush
), by
clicking Start | Programs | Control Panel | Administrative Tools | Write Filter, or by
clicking Start | Programs | Write Filter.
The Write Filter Control dialog box is used to query the cache, flush the cache, view the
status of the Write Filter, and disable/enable the Write Filter.
The status (enabled/disabled) of the Write Filter is displayed by the Write Filter status icon
on the taskbar system tray (a green icon indicates that the Write Filter is enabled, and a
red icon indicates that the Write Filter is disabled).
For detailed information about the Write Filter, refer to “Write Filter” on page 41.
Figure 18 Write Filter Control dialog box