White Rodgers 1F95-80 - Manual (Page 31)

31
8. Repeat steps 2 through 5 to check cooling
times and temperatures.
9. Press RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
Press SYSTEM
SWITCH
until OFF is displayed. Reat-
tach thermostat to subbase. Then press
SYSTEM
SWITCH
to select the operation mode you want
(HEAT, COOL, AUTO).
When you have completed programming and
selected the desired operating mode, you may
set option switch #4 for total keypad lockout.