Wachsmuth & Krogmann TAW-2030 - Manual (Page 13)

4. Set the pressure regulator to the required
working pressure. (see FIG. 2)
FIG. 2
5. Connect the air-hose to the pressure-hose
connector (8). (see FIG. 3)
6. Connect the air-tool with the air-hose.
7. If you will not start to work immediately,
switch the compressor off and disconnect from
the power-supply.
FIG.3
FIG. 4
CAUTION: The regulated pressure may not exceed the maximum working
pressure of your connected air-tool!
If you notice any unusual noise or vibration, stop the air compressor and
refer to “troubleshooting”
12