Wachsmuth & Krogmann TAW-2030 - Manual (Page 6)

5
ƒ Do not use the compressor without installed guards.
ƒ Please note that the compressor will start automatically, when the pressure falls
to the minimum designated pressure.
ƒ Make sure the compressor is switched off and disconnected from the power
supply before starting it.
ƒ Check the compressor and the accessories carefully and follow their instructions
for maintenance.
ƒ Check the compressor for possible damages before any use. All safety and
protection devices or slightly damaged parts must be inspected for proper
function before any use.
ƒ Check to see that all of the moving parts are working properly and are not
jammed.
ƒ All parts have to be mounted correctly and have to meet all conditions for proper
operation of the compressor.
ƒ All damaged protection parts have to be repaired or replaced by an authorized
service station.
ƒ Damaged switches have to be replaced by an authorized service-center.
ƒ Do not operate the compressor, in case the switch cannot switch “ON” or “OFF”.
ƒ Keep handles dry and free from oil or grease.
SAVE THESE INSTRUCTIONS!