Set lengths for code 11 (continued) – Wasp Bar Code Wasp Duraline WLS 8400 FZ User Manual
Page 181
Symbologies
8-35
Set Lengths for Code 11 (continued)
Two Discrete Lengths - This option allows the scanner to decode only those Code 11
symbols containing either of two selected lengths. Lengths are selected from the numeric
bar codes beginning on page
. For example, to
decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 -
Two Discrete Lengths, then scan 0, 2, 1, and then 4. In case of an error, or to change
the selection, scan Cancel on page
.
Code 11 - Two Discrete Lengths
Length Within Range - This option allows the scanner to decode a Code 11 symbol
with a specific length range. The length range is selected from numeric bar codes
beginning on page
For example, to decode Code
11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within
Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be preceded by a leading
zero). In case of an error, or to change the selection, scan Cancel on page
.
Code 11 - Length Within Range
Any Length - This option allows the scanner to decode Code 11 symbols containing any
number of characters within the scanner capability.
Code 11 - Any Length