Wasp Bar Code Wasp Duraline WLS 8400 FZ - Manual (Page 213)

Miscellaneous Scanner Options 9-7
Scan Data Transmission Format
To change the Scan Data Transmission Format, scan the Scan Options bar code below.
Then select one of four options:
• Data As Is
• <DATA> <SUFFIX>
• <PREFIX> <DATA>
• <PREFIX> <DATA> <SUFFIX>
When a selection is made, scan the Enter bar code on page 9-8 . In case of a mistake, scan
the Data Format Cancel bar code on page 9-8 .
To program a carriage return/enter after each bar code scanned, scan the following bar
codes in order:
1. <SCAN OPTIONS>
2. <DATA> <SUFFIX>
3. Enter (on page 9-8 )
Scan Options
*Data As Is
<DATA> <SUFFIX>