Whirlpool Roper RAB3132EW0 - Manual (Page 10)

10
Selecting a cycle, time, and temperature
Use the information in this section to help
you make the best cycle selections for your
wash loads. Each cycle is designed for
different types of fabrics and soil levels.
O P E R A T I N G Y O U R W A S H E R
Heavy cycle
The Heavy cycle features warm or hot water
and longer spins to shorten drying time.
Select this 14-minute cycle to clean large
loads of sturdily constructed fabrics that are
heavily soiled.
Normal cycle
The Normal cycle features cold or warm
water and longer spins to shorten drying
time. Use this 10 or 12-minute cycle to clean
cotton and linen fabrics that are moderately
to heavily soiled.
Light cycle
The Light cycle features a brief wash with
cold water and longer spins to shorten
drying time. Use this 6-minute cycle for
cleaning delicate items and washable knits
that are lightly to moderately soiled.
Cycle options
You may select a different wash time by first
selecting the water temperature (Hot, Warm
or Cold) and then turning to the new wash
time. For example, for 14 minutes of wash
time with Cold water:
1. Push in the Cycle Control Knob and turn
it clockwise to Cold.
2. Pull out the Cycle Control Knob and allow
your washer to fill.
3. When your washer has filled, push in and
turn the Cycle Control Knob to Heavy,
14 minutes of wash time.
4. Pull out the Cycle Control Knob.
LIGHT
NORMAL
HEAVY
COLD
COLD
WARM
PULL START PUSH STOP
Spin
14
10
6
OFF
Rinse
LIGHT
HEAVY
COLD
COLD
NORMAL
WARM
HOT
PULL START PUSH STOP
Spin
14
10
12
6
OFF
Rinse
• The washer pauses briefly throughout
each cycle. These pauses are normal for
washer operation.
• Page 12 describes what happens during a
wash cycle.