Whirlpool Roper RAB3132EW0 - Manual (Page 11)

11
Using rinse and spin
(models with Water
Temperature Selector in
Cycle Control Knob)
When using extra detergent for heavily-
soiled clothes, or washing special-care
items, you may find an extra rinse and spin
is needed.
1. For an additional rinse, push in the Cycle
Control Knob and turn it clockwise to
Rinse, as shown.
2. Pull out the Cycle Control Knob. The
washer fills, agitates, drains, and spins.
Using drain and spin
(models with Water
Temperature Selector in
Cycle Control Knob)
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in the Cycle Control Knob and turn
it clockwise to Spin, as shown.
2. Pull out the Cycle Control Knob. The
washer drains, then spins.
O P E R A T I N G Y O U R W A S H E R
Rinse
OFF
Spin
OFF
Stopping/restarting your washer
• To stop the washer at any time, push in
the Cycle Control Knob.
• To restart the washer, close the lid (if
necessary) and pull out the Cycle
Control Knob.