Whirlpool Roper RAB3132EW0 - Manual (Page 6)

6
O P E R A T I N G Y O U R W A S H E R
3. Close the washer lid.
4. Select a setting with the Water Level
Selector that corresponds with the
size of your wash load and the type of
fabric being washed.
• To change the water level setting after
the washer has started to fill, move the
Selector to the desired new setting.
• See pages 15 and 16 for loading tips.
5. Select a wash-rinse temperature with
the Water Temperature Selector. Match
the water temperature with the type of
fabric and soils being washed. See
page 17 for water temperature guidelines.
6. Push in the Cycle Control Knob and
turn it clockwise to the wash cycle
you want. See page 7.
7. Pull out the Cycle Control Knob to
start the washer.
8. (OPTIONAL STEP) If desired, add
measured and diluted liquid fabric
softener to the final rinse cycle.
See page 13.
LARGE
SMALL
EXTRA
LARGE
MEDIUM
WATER LEVEL
WARM
WARM
COLD
COLD WARM
COLD
WASH
RINSE
HOT
COLD
TEMPERATURE