Weider WEBE06110 - Manual (Page 6)

Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
6
1
1. Before assembling this product, make sure you
understand the information in the box above.
Press two 50mm Square Inner Caps (28) into the
base of each Upright (1, 15).
Orient the Crossbar (3) with the warning decal fac-
ing up, as shown. Attach the Crossbar to the Left
Upright (15) with two M10 x 70mm Bolts (26), a
Support Plate (14), and two M10 Nylon Locknuts
(30).
The Upright must be oriented as shown.
Attach the Crossbar (3) to Right Upright (1) in the
same manner.
Do not tighten the M10 Nylon Locknuts (30) yet.
2. Tap a 38mm Inner Cap (32) into the Front Leg (8).
Attach the Frame (2) to the Front Leg (8) with two
M8 x 50mm Bolts (19), four M8 Washers (17), and
two M8 Nylon Locknuts (13).
Do not tighten the M8 Nylon Locknuts (13) yet.
26
28
28
28
14
14
26
3
15
30
30
30
28
1
Decal
2
8
19
13
17
32
17
2
17
17