Windster WS-38 - Manual (Page 18)

1. Remove stainless Baffle filters. ( Ref.P8-H)
2. Remove screws on wiring case,
fish out wires through the
knockout. (Fig.12)
3. Mark the electrical connection by
fastening all wires to the existing
wall wiring according to the their
colors. (Black to Black, White to
White, Green to Ground)
4. After connection is done, reinstall wiring case cover and bottom board.
5. Turn on power and check operation of fan and light.
P. Making The Electrical Connection
16
Q. Use and Care
Fig.12
wire case
1.
A. By pressing , all functions are stand-by.
B. By pressing again, all functions will be turned off.
Main power button
NOTE: ALL FUNCTIONS CAN BE WORKED ONLY UNDER THE
MAIN POWER IS ON.
OFF
Night light sensor
Main power Fan OFF LED light 3 speed fan selection
6. After completely installation, reinstall the stainless Baffle filter and oil collector.
( Ref. P8-H)