Windster WS-38 User Manual
Page 21
Correction
Symptom
Fan are not operatable.
Illuminating LED light
does not work
A. Check power source to see if it is normal.
A. Disconnect the power source.
Hood vibrates.
A. Check for damaged vanes.
B. Check power inlet plug to see if it is
plugged firmly into it's socket.
B. Check LED light, replace it with a new
one if it is burned out.
B. Check if exhaust duct is secured.
R. Troubleshootings
19
S. Replace The LED Light
Before changing LED light ensure the unit is pressed the
main power button off,
when you want to change the LED light please always wear working gloves.
1. Using suitable tool (small slotted screw driver) gently pry off the LED light set.
2. Taking off the wire connecter with LED light set.
3. Replace a new LED light set and reconnect the wire to the connector.
4. Before push back the original LED light position, test the LED light.
NOTE: For LED light replacement, you may not find the appropriate LED lights
from market, please contact with distributor(s)/dealer(s).
LED light: 1W
Model: HP-15A
LED driver:
Model: HP1500-36
input: 100~240vdc
output: 3.6vdc=1500maH