Wolf IF15/S - Manual (Page 7)

Fryer Module Specifications 7
wolfappliance.com/specs
Installation Specifications
MULTIPLE COOKTOP INSTALLATION
If the fryer module is to be used in combination with
additional cooktops or modules with a filler strip, refer to
the chart below for the countertop cut-out width. The
dimensions are derived by adding an additional 1 1 / 4 " (32)
for each additional unit, to give you the total countertop
cut-out width. Dimensions include the filler strip.
When multiple cooktops are installed side by side, each
unit must have its own separate, recommended electrical
circuit.
When two or more cooktops or modules are installed
together, an integrated module filler strip is recommended.
The filler strip and other accessories are available through
your authorized Wolf dealer. To obtain local dealer informa-
tion, visit the find a showroom section of our website,
wolfappliance.com.
IMPORTANT NOTE: Review specific installation instruc-
tions for product to product capabilities.
Multiple Cooktops
COUNTERTOP CUT-OUT WIDTH
2 Modules 29 1 / 4 " (743)
3 Modules 44 1 / 2 " (1130)
4 Modules 59 3 / 4 " (1518)
30" (762) Cooktop / Module 44 1 / 4 " (1124)
30" (762) Cooktop / 2 Modules 59 1 / 2 " (1511)
36" (914) Cooktop / Module 50 1 / 4 " (1276)
The fryer module must be installed at least 15" (381)
from any open-flame cooking device or a Wolf steamer
module. The open flame may cause ignition of oil, and
contact between water and hot oil may cause burns.