Wolf IF15/S - Manual (Page 9)

Fryer Module Installation 9
wolfappliance.com/specs
Before Operating
Read the entire Wolf fryer module use & care guide
included with the unit. It contains important safety, opera-
tion, service and warranty information.
Before operating, clean the fryer module thoroughly with
hot water and a mild detergent. Rinse and dry with a soft
cloth. This removes any residual oil and grease left on the
surface from the manufacturing process. Refer to care
recommendations in the use & care guide.
Never operate the fryer module without oil; damage to
the unit may result. Oil must be added to the fryer basin
before turning the module on.
Module Removal
IMPORTANT NOTE: Removal of the fryer module should
only be performed by a Wolf authorized service center
technician.
If removing the fryer module is necessary for cleaning or
service, first disconnect the electric supply. Remove the
mounting brackets on each side of module and remove.
To reinstall, follow the steps on the previous page.
The fryer module must be disconnected from power
prior to removal and service.